PROTEAN Submersive Extreme Grease - TF84

PROTEAN

Write a Review
£443.78 (Inc. VAT)
£369.82 (Ex. VAT)
SKU: TF8404B
UPC: 5060253473780
Food Safe: Yes
Adding to cart… The item has been added

 APPROVAL CERTIFICATE   ALLERGENS   SAFETY DATA SHEET   TECH SHEET

 

PROTEAN Submersive Extreme is a NSF H1 registered, highly versatile grease, developed to resist extreme water wash off and heavy loads. Characterized by an exceptional high dropping point, high load carrying performance, reduced wear and excellent resistance to water and corrosion, PROTEAN Submersive Extreme, outperforms other premium water resistant greases on several levels, and is best suited for low to medium speed bearings operating under adverse conditions.

Features:

  • NSF: H1 registered
  • Superior mechanical stability, particularly in the presence of heat and water
  • Designed to provide superior performance at elevated temperatures and during periods of infrequent lubrication
  • Exhibits excellent EP performance with a 4 ball weld load of 700kg
  • Excellent mobility and torque, even at sub zero temperatures down to -40°C)
  • Specially formulated for enhanced resistance to water
  • Life performance up to four times that of a regular mineral oil based grease
  • Temperature range -40°C to +165°C

 

PROTEAN Submersive Extreme can be applied by hand, by grease gun, keg pump or by other methods suitable for an NLGI No. 2 grease. As with all greases used for the first time, check compatibility with the previously-applied grease and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.

  • Category: H1 (Lubricants with incidental food contact, in and around food processing areas)
  • NSF Registration: 165177
  • Allergens: Does not contain allergens, genetically modified ingredients, nut oil or derivatives.
  • Appearance: Smooth beige grease
  • NLGI classification: 2 (ASTM D217)
  • Dropping point: 270°C (ASTM D2265)
  • 4-ball EP weld load: 700 Kg (IP239)
  • Water washout @ 80c % loss: 3.5 (ASTM D1264)
  • 4-ball wear: 0.50mm (IP239)
  • Copper corrosion rating: 1B (ASTM D4048)
  • Oil separation, % loss: 0.1 (ASTM D1742)
  • Base oil viscosity @40c: 460cSt
  • Bomb oxidation, psi drop 100 hours: 3.0 (ASTM D3527)
  • Rust test, rating: Pass (ASTM D1743)
  • Operating temperature range: -40c to +165c
  • Low temperature torque -40c, g-cm: Start: 6000, 60 minutes: 800
Chart Review
5 stars (0)
4 stars (0)
3 stars (0)
2 stars (0)
1 star (0)
Ask An Exert Icon
Have Questions? Ask an Expert
Close Side Bar Button