APPROVAL CERTIFICATE ALLERGENS
PROTEAN Chain Spray is an NSF: H1 registered, highly tenacious, food grade chain spray lubricant designed to keep chain and drive systems operating smoothly. Being both non-toxic and water resistant, PROTEAN Chain Spray is ideal for use on food conveyor systems where frequent washing down is required. Suitable for use in Packaging, Pharmaceutical and other cleanroom environments.
Benefits:
- Water resistant – withstands washing;
- Formulated with anti-fling additives for effective use on fast moving components - will not drip off;
- Anti-corrosion additives;
- Withstands high temperatures;
- 360° valve for inverted use;
Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Store out of direct sunlight and below +50°C. Shake aerosol well before use. Clean area to be sprayed of all dirt and contaminants prior to use. Spray in short bursts, from a distance of 15-25cm away from the intended area/surface. Allow the grease to penetrate for 5 minutes and wipe off any excess before use. Dispose of used aerosols in line with local and national regulations.
*Image for illustrative purposes only
NSF Certificate No: 139272
Appearance: Off white/creamy colour grease
Flammability: Extremely flammable aerosol
Propellant(s): Butane/propane/isobutane
Storage: Below 50˚C
Flash Point: -60˚C
Temperature Range: -20˚ to 200˚C
Relative Density: 0.92
Category: H1 registered (lubricant with incidental food contact, for use in and around food processing areas)