
TYGRIS Chain & Wire Rope Lubricant - R220
TYGRIS R220 is a robust, molybdenum-disulphide-reinforced aerosol lubricant engineered for heavy-duty chains and wire ropes. It penetrates deep to shield drive chains, forklift chains, wire hoists, and cable systems delivering long-term wear protection, resistance to elongation, and corrosion defence under extreme load and high-speed conditions.
Key Benefits
-
Extreme-pressure protection: Molybdenum disulphide and EP additives tackle heavy loads head-on.
-
Outstanding adhesion: Formulated to stay on-target and resist fling-off, even at high RPM.
-
Deep penetration: Aerosol spray with aggressive wetting action to reach pins and bushings for full-contact protection.
-
Corrosion & elongation prevention: Thin protective film guards metal while reducing wear and chain stretch.
-
Water resistant: Maintains lubrication integrity in wet and humid environments.
Technical Specifications
-
Appearance: Dark grey, slightly foaming spray
-
Odour: Oily solvent blend
-
Contents: Mineral oils, molybdenum disulphide, bitumen, xylene, white spirit, EP & dewatering agents, hydrocarbon propellants (no silicones)
-
Flash Point: <0 °C (extremely flammable aerosol)
-
Solubility: Insoluble in water
-
Operational Range: –10 °C to +180 °C
-
Relative Density: ~0.845
-
Flammability: Extremely flammable pressurised aerosol
Application & Usage
Shake can vigorously. Hold 15–30 cm from the chain or rope. Spray thoroughly, ensuring deep penetration. Wipe away excess to leave only a film for corrosion defence. After usage, invert can and spray briefly to clear the nozzle. Use PPE and consult the Safety Data Sheet for full handling guidance.
Packaging
-
Available in 400 ml aerosol cans
*Image for illustrative purposes only

Recommended Products


TYGRIS
PRECISION Clear Forklift Chain Lubricant - IS75

TYGRIS